Lubricating The Gearbox; Replacing Starter Rope And Rewind Spring - Stihl FS 110 Manual De Instrucciones

Lubricating the
Gearbox
1
2
: Check grease level regularly - about
every 25 hours of operation.
: Unscrew the filler plug (1).
:
If no grease can be seen on the
inside of the filler plug, screw the
tube (2) of STIHL gear lubricant for
brushcutters - see "Special
Accessories" - into the filler hole.
:
Squeeze up to 1/5 oz (5 g) grease
into the gear housing.
Do not completely fill the gear
housing with grease.
:
Refit the filler plug and tighten it
down firmly.
FS 110
Replacing Starter Rope
and Rewind Spring
1
2
1
Replacing the starter rope
:
Move slide control in direction of
c – arrow to $.
:
Take out the screws (1).
:
Lift the starter cover (2) off the
housing.
1
: Remove the spring clip (3).
: Remove the rope rotor with
washer (4) and pawl (5).
English / USA
3
4
5
41