Technical Service - Aesculap Acculan 4 GA334 Instrucciones De Manejo

en
Issue
Saw blade not moving
Insufficient cutting per-
formance of the saw blade
The saw blade cannot be
coupled
Saw blade cannot be
locked and can be pulled
out during function check
Saw blade cannot be
uncoupled
Support foot cannot be
coupled

10. Technical Service

Danger to life of patients and users if the product
malfunctions and/or protective measures fail or are
not used!
WARNING
►
Do not perform any servicing or maintenance
work under any circumstances while the product
is being used on a patient.
►
Do not modify the product.
Modifications carried out on medical technical equipment may result in
loss of guarantee/warranty rights and forfeiture of applicable licenses.
►
For service and repairs,
B. Braun/Aesculapagency.
14
Cause
Loud running noise from motor Defective gearings
Saw blade teeth worn
Battery too weak
Battery worn out or defective
Symbol "Battery replacement
recommended" illuminated on
the charger
Debris on the saw blade or in
the coupling
Coupling components or saw
blades deformed
-
Saw blade can be pulled out
without rotating sleeve action
-
Saw blade coupling warped or
bent saw blade
Support foot cannot be cou-
pled
Support foot cannot be cou-
pled
Marking on support foot points
to "Closed" symbol.
please contact your
Detection
Blunt saw blade
Insufficient motor power/speed
Debris
Deformation
Incompatible saw blade
Rotating sleeve in incorrect position
(not returning automatically to rest
position)
Rotating sleeve in incorrect position
Mechanical damage
Saw blade bent
Support foot bent
Locking sleeve is closed
Service addresses
Aesculap Technischer Service
Am Aesculap-Platz
78532 Tuttlingen / Germany
Phone: +49 (7461) 95 -1601
Fax: +49 (7461) 14 -939
E-Mail: ats@aesculap.de
Or in the US:
Aesculap Inc.
Attn. Aesculap Technical Services
national
615 Lambert Pointe Drive
Hazelwood
MO, 63042 USA
Aesculap Repair Hotline
Phone: +1 (800) 214 -3392
Fax: +1 (314) 895 -4420
Other service addresses can be obtained from the address indicated above.
Remedy
Have repaired by manufacturer
Replace saw blade
Charge battery
Replace battery
Clean saw blade/coupling with cleaning
template 7
Have repaired by manufacturer
Insert a compatible Aesculap saw blade, see
Accessories/Spare parts
Clean the coupling if it is dirty
If damaged, have device repaired by the manu-
facturer
Turn rotating sleeve 180° in direction of the
arrow, see Attaching and detaching the saw
blade
Have repaired by manufacturer
Replace saw blade
Have support foot repaired by the manufacturer
Open locking sleeve, see Coupling the support
foot.