Connecting/Removing Modules - Mettler Toledo SevenExcellence Instrucciones De Instalación

4.3 Connecting/Removing Modules
Note
Before connecting or removing modules switch off the instrument.
METTLER TOLEDO offers three different modules. The type of module is identified by a colored tag.
●
Yellow for pH/mV
●
Purple for conductivity
●
Orange for pH/Ion
The instrument can be equipped with up to three modules. The modules can be combined in any
composition and order according to your requirements.
If you are working with less than three modules, we recommend the connection of blank modules
to protect open sockets against moisture or contamination.
Connecting modules
● Insert the expansion unit into the slot. The guide rails simplify the connecting.
Installation 15