Frigomat G5 Manual Mantenimiento página 18

We congratulate you for having chosen to purchase a FRIGOMAT machine.
This machine is designed and built to guarantee maximum performance
and reliability.
This manual, supplied together with the machine, must be considered an
integral and essential part and must be delivered to the final user.
EN
Before carrying out any operations, we recommend studying these
instructions carefully because only by reading them carefully can you
obtain the maximum performance from your machine.
The following pages carry all of the indications required to perform com-
missioning, operation, adjustments and maintenance correctly.
Keep this manual carefully for further use and provide it to the technician
in case of intervention on the machine.
The machine is covered by warranty according to the terms illustrated in
the "WARRANTY CARD" supplied. It must be duly filled in and returned to:
FRIGOMAT S.r.l., via 1° Maggio, 28
26862 GUARDAMIGLIO (LODI) – ITALIA
Please write the serial number of your machine in the field below.
Matr.
Please affix the dealer's stamp in the field below
The manifacturer reserves the right to carry out the modifications it deems
necessary to improve its product or the technical manual without prior
warning, inserting the variations in the subsequent editions.
Only instructions originating from the factory or its authorized translation
representative(s) are considered to be the original set of instructions.
Total or partial reproduction, adaptation or translations of this manual
without prior written consent by the manifacturer is prohibited.
Limitation of liability
All information and indications contained in these instructions have been
collected in consideration of legal regulations and prescriptions. The
manufacturer declines all responsibility for damage to persons, animals or
property resulting from:
- Failure to comply with the instructions and safety requirements contained
therein.
- Failure to comply with local safety regulations.
- Use not in accordance with the intended use.
- Use of unauthorized and untrained personnel for use and maintenance.
- Conversions and technical modifications made independently to the
appliance by the customer.
- Use of spare parts not approved by the manufacturer.
- Failures or voltage fluctuations in the power supply or protective devices.
Failure to comply with the above conditions also results in the loss of the
guarantee.
User informations
Technical informations
Warning: information that, if correctly followed, avoids risks to
people, the machine and the product.
Warning: information that, if correctly followed, avoids risks to
the machine and the product.
Suggestion: information to follow for optimal machine operation
and product quality.
G5 G10
FRIGOMAT
KEY
M04.37562 R.2021.10.23
Index
KEY
Index
I MACHINE DESCRIPTION
1 GENERAL SAFETY STANDARDS
2 USE
3 WORKING LIMITS
4 MARKING AND GRAPHIC SIGNS
5 SAFETY DEVICES
II TRANSPORT AND COMMISSIONING
1 PRELIMINARY INSPECTION
2 TRANSPORT AND STORAGE
3 COMMISSIONING PLACE, POSITIONING
4 COMMISSIONING
III USE
1 PREPARATION FOR USE
2 PRELIMINARY CHECKS
3 ICE CREAM PRODUCTION
4 OPERATIONAL ROUTINES
IV CLEANING AND MAINTENANCE
1 CLEANING
2 CHECKLIST CLEANING AND SANITATION
3 MAINTENANCE
4 FAILURES IDENTIFICATION
V PROGRAMMING
1 RESET
2 PROGRAMMING
VI EXTRAORDINARY MAINTENANCE
1 EXTRAORDINARY MAINTENANCE
2 DECOMMISSIONING
VII APPENDICES
DATA SHEETS
TAV. 01 - 08
VIII WARRANTY
WARRANTY
1
1
1
2
2
2
2
3
4
4
4
4
6
6
6
8
9
10
10
12
14
14
16
16
ii
iv
xii