Publicidad
Idiomas disponibles
Idiomas disponibles
Cooktop Maintenance
Round Burner Head / Caps
After assembling the burners, test for proper function. Improper assembled parts will cause
poor ignition or uneven flames (see below). If the flame and excessively yellow, shut off the
burner immediately and let it cool. Adjust the burner caps, and relight the burner. A good flame
is blue and even all around the burner.
86
English
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 86
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 86
1. Put the burner heads on the burner bases
as shown at left. (The bottom of the head
fits inside the top of the base.)
2. Twist each head back and forth slightly
until it drops into place.
3. Place the burner caps atop the burner
rings. The ridge around the bottom of
each cap fits around the top of the ring.
2023-02-23 오후 5:22:30
2023-02-23 오후 5:22:30
Publicidad
