Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
Information Codes
Displayed
code
C-d1
Occurs if door lock is mispositioned.
Communication between Main and Sub PBA
C-F0
was interrupted.
Communication between Main and Touch
C-F2
was interrupted.
Oven sensor is either open or short when
C-20
oven is on.
C-21
Occurs if internal temp is unusually high.
Temp probe sensor is short when oven is on. Press OFF, and restart oven.
C-23
PCB sensor is either open or short when
C-30
oven is on.
C-31
Occurs if PCB temp is unusually high.
Steam sensor is either open or short when
C-70
oven is on.
C-72
Problem with drain system.
C-A2
Problem with cooling motor.
98
English
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 98
FULL_DACOR_DOP48C96DLMDA_EN+MES+CFR.indb 98
Possible cause
Solution
Press OFF, and restart oven.
If issue persists, disconnect
power to oven for at least 30
sec's, then reconnect. If issue is
not resolved, call for service.
Restart appliance.
If issue persists, disconnect
power to oven for at least 30
sec's, then reconnect. If issue is
not resolved, call for service.
Call for service
Press OFF, and restart oven.
If issue persists, disconnect
power to oven for at least 30
sec's, then reconnect. If issue is
not resolved, call for service.
Call for service.
2023-02-23 오후 5:22:32
2023-02-23 오후 5:22:32
Publicidad
