SICE S 100 PL Manual De Instrucciones página 68

22 Doyfe inflator chuck.
23 Control valve for lower bead breaking
arm ascent descent.
24 Control valve for locking dual-position
bead breaker supports.
25 Control push-button for upper bead
breaker disc penetration.
(the bead breaker disc is activated by
pressing this push-button; every time the
breaker disc moves away from the rim-,
the bead breaker disc is deactivated).
26 Control push-button for lower bead
breaker disc penetration.
(the bead breaker disc is activated by
pressing this push-button; every time
bead breaker disc moves away from the
rim-, the bead breaker disc is deactiva-
ted).
27 Control push-button for bead breaking
unit unlocking and opening.
28 Head control lever.
29 Wheel lifter pedal (optional).
30 Vertical arm ascent/descent push-button:
A: ascent B: descent C: locked
Key to danger/warning decals
Risk of crushing.
Never place any part of the body, particu-
larly your hands, between the bead breaker
disc or the demounting/mounting tools and
the wheel. Never place your hand between
the turntable and the wheel.
Risk of crushing.
Never place any part of the body between
the wheel lifter and any other component
with which it comes into contact.
68
NEVER stand behind the
machine.
Only one operator may operate and use
the machine.
NEVER stand or walk close to the machine
when it is in operation. The tool-holder arm
and the bead breaking unit have a lateral
opening.
NEVER stand behind the
machine.
Risk of crushing.
Never place any part of the body, particu-
larly your hands, between the demounting/
mounting tool and the wheel.
Preliminary checks
Check that there is a pressure of at least
8 bar on the pressure gauge of the Filter
Regulator + Lubricator unit.
Check that the machine has been adequa-
tely connected to the power mains.
Deciding from which side of the
wheel the tyre must be demounted
See fig. 11.
Find the position of the drop centre A on
the wheel rim. Find the largest width B and
the smallest width C.
The tyre must be demounted or mounted
with the wheel positioned on the turntable
with the side with the smallest width C
facing upward.
User Manual S 100 PL