SICE S 100 PL Manual De Instrucciones página 81

CORRECT PROCEDURE FOR
DEMOUNTING/MOUNTING
RUN FLAT TYRES FITTED
WITH VALVE SENSOR
NB: if the sensor is on the tyre valve.
Demounting
air out of the tyre.
nut and let the sensor to fall into the tyre.
rotational bead breaking stage.
upper bead breaking until the sensor is
at 12 o'clock and not beyond.
gripper at 2 o'clock.
lower bead.
o'clock).
6 o'clock (sensor at 10 o'clock).
head.
with the bead breaker disc in the down
position.
care not to damage the sensor.
Tyre mounting
User Manual S 100 PL
mounting head and starts to be mounted
on the rim.
mounted.
presser gripper to be inserted at 3 o'clock.
cm (2 or 3 inches) to keep the upper bead
of the tyre inside the open centre during
rotation.
adjustments until the upper bead has
been mounted.
a second Run-Flat gripper and/or the bead
presser accessory, if available.
Run-Flat grippers used.
bead insertion.
81