Publicidad
Idiomas disponibles
Idiomas disponibles
2) Installing the wheels
Mount the wheel on the axle (B), and make sure that the flat side of the
blade is facing the machine. Slide the washer (A) onto the wheel axle. Insert
the split pin (C) into the hole to secure the wheel on the axle.
3) Installing the wheel bracket
Align the wheel bracket (B) with the screw holes on the unit housing. Use
bolts (A) to fix the wheel bracket to the rebuild.
4) Installation of the loading hopper
Position the loading hopper (A), make the mounting holes fit, and use the
screw (D) to secure it. Tighten the nut (B) to secure the hopper to the
housing of the unit.
Publicidad
