Publicidad
Idiomas disponibles
Idiomas disponibles
Check the technical condition
of the loading hopper, outlet
hopper and covers
Remove debris from the
engine and chipper
Check/turn the chipping
hammers
Check/turn the cutting knives
Maintenance of the engine
Always check the oil level before starting the engine.
•
•
Change the oil after the first 5-8 hours of operation. Change the oil when the
engine is warm. Fill with new oil of the recommended grade (SAE L5W-40).
Check the spark plug every year or every 50 hours of operation.
•
•
Check and replace the air filter regularly.
Keep the engine and parts clean.
•
•
Check the engine and accessories frequently for loose nuts and bolts and
keep them tight.
Checking for loose parts
Service interval: every 5 hours; every spring and fall.
•
Check the machine for loose parts.
•
Pay particular attention to the fasteners for the loading and discharge
•
hopper, the axle of the wheels, and the front support.
Checking the safety stickers
Service Interval: Every spring and fall.
•
•
Check that safety stickers are in place and not damaged.
Replace damaged or missing stickers.
•
Checking the loading hopper, discharge hopper, tank, and covers
Service Interval: Every spring and fall.
•
•
Check that the loading hopper, discharge hopper, tank, and covers are in
place, undamaged and secure.
Replace any damaged or missing parts.
•
Removal of debris from the machine
• Service Interval: Before each use and every 100 hours.
• The engine requires airflow for cooling and combustion.
• Before each use, clean the device of any dirt, especially around the air intake, air
filter, and muffler. Every 100 hours, remove the engine air cover and remove any
X
X
X
X
X
Publicidad
