Angelo Po 1N1BR2G Manual De Uso página 29

Faults
The pilot light does not
ignite.
The pilot light ignites but the
burner remains off .
The fl ame is yellow.
Burner control knob is stiff .
No water delivered.
_ut_GB
Causes
The spark ignition devices
are not working.
Air in pipelines due to long
period out of use.
Burner dirty, heat exchange
pipes clogged, condensation
drips.
Gas valve malfunction.
Filler solenoid valve faulty.
Filling switch malfunction.
Well raised or not resting on
fi xed part of appliance.
- -
Remedies
Check that the ignition devices are
in good working order.
Light by hand with a naked light.
Important
Contact the after-sales service.
Make more attempts to light the
fl ame.
Check the condition of the ther-
mostat and activate any ignition
enabling device.
Important
Contact the after-sales service.
Important
Contact the after-sales service.
Check the pressure switch connec-
tion.
Important
Contact the after-sales service.
Check the water connection.
Important
Contact the after-sales service.
Check that the well is not raised or
not resting fi rmly on fi xed part of
appliance.
GB GB
ENGLISH