Publicidad
Idiomas disponibles
Idiomas disponibles
Powering up and Start-up
Step
Indication on the Display/Action
11
If necessary, modify the content of "P0400 - Motor
„
Rated Voltage"
Press the key
for the next parameter
„
13
If necessary, modify the content of "P0403 - Motor
„
Rated Frequency"
Press the key
for the next parameter
„
15
If necessary, modify the content of "P0404 - Motor
„
Rated Power"
Press the key
for the next parameter
„
17
If necessary, modify the content of "P0408 – Self-
„
Tuning "
Press the key
for the next parameter
„
32 | MW500
Step
Figure 5.4: Sequence of the Start-up group for V/f control
Indication on the Display/Action
12
If necessary, modify the content of "P0401 - Motor
„
Rated Current"
Press the key
for the next parameter
„
14
If necessary, modify the content of "P0402 - Motor
„
Rated Speed"
Press the key
for the next parameter
„
16
If necessary, change "P0406 - Motor Ventilation"
„
Press the key
for the next parameter
„
18
To end the Start-up routine, press the key BACK/
„
ESC
To return to the monitoring mode, press the key
„
BACK/ESC again
Publicidad
