Publicidad
Idiomas disponibles
Idiomas disponibles
Summary of Reviews
The information below describes the reviews in this manual.
Version
-
-
NOTE!
The inverters MW500 have the default parameters set as described below:
50 Hz for models with internal filter (check the smar t code E.g.:
„
MW500B06P5T4).
ATTENTION!
Check the frequency of the power supply.
In case the power supply frequency is different from the default frequency
(check P0403), it is necessary to set:
P0204 = 5 for 60 Hz.
„
P0204 = 6 for 50 Hz.
„
It is only necessary to set these parameters once.
Refer to the programming manual of the MW500 for further details about the
setting of parameter P0204.
Review
R00
First edition
R01
General Review
Description
Publicidad
