WEG MW500 G2 Manual De Usuario página 39

5.3.2.2 VVW Control Type (P0202 = 5)
Step Indication on the Display/Action
1
Monitoring mode. Press the key ENTER/MENU to
„
enter the 1 level of the programming mode
st
3
When the STARTUP group is selected press the
„
key ENTER/MENU
5
Press ENTER /MENU to save the modification
„
of P0202
7
If necessary, modify the content of "P0399 - Motor
„
Rated Performance", or press the key
next parameter
9
If necessary, modify the content of "P0401 - Motor
„
Rated Current", or press the key
parameter
11
If necessary, modify the content of "P0403 - Motor
„
Rated Frequency", or press the Key
next parameter
Step Indication on the Display/Action
2
The PARAM group is selected, press the keys
„
or
4
Press ENTER/MENU and with the keys
„
set the value 5, which activates the control
mode V V W
6
Press the key
„
of the V V W
8
If necessary, modify the content of "P0400 - Motor
„
for the Rated Voltage", or press the key
parameter
10
If necessary, modify the content of "P0402 - Motor
„
for the next Rated Rotation", or press the key
parameter
12
If necessary, modify the content of "P0404 - Motor
„
for the Rated Power", or press the key
parameter
Powering up and Start-up
until selecting the STARTUP group
to proceed with the Start-up
for the next
for the next
for the next
MW500 | 33
and