Descargar Imprimir esta página

Angelo Po 1S1BR1G Manual De Uso página 152

Sartén de gas

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ENGLISH
HANDLING AND INSTALLATION
INSTRUCTIONS AND WARNINGS FOR HANDLING AND INSTALLATION
NOTE: Read the following sections of
the "User instruction manual" carefully be-
fore performing any handling and installa-
tion operations:
– Hazards and safety provisions during trans-
port .
– Hazards and safety provisions during assem-
bly .
– Hazards and safety provisions during instal-
lation, commissioning, adjustments and part
replacement .
The packaging is designed to reduce space and
as appropriate to the type of transport used . T o
simplify transport, some components may be
removed and suitably protected and packed for
transport .
The packaging carries all information necessary
for loading and unloading .
When unpacking, check that all components are
present in the correct quantities and are undam-
aged .
The packaging material must be properly dis-
posed of in accordance with legal requirements .
Different means of transport may be used, de-
pending partly on the destination .
The chart shows the most commonly used alter-
natives .
During transport, fix the packaging to the
means of transport securely to prevent undesir-
able shifting .
8
tion operations shall be carried out in accor-
dance with current legislation on health and
safety at work . If necessary, the person au-
thorised to carry out these operations should
organise a "safety plan" to protect the people
directly involved .
(water, electricity and gas) must be set up ex-
clusively by suitably qualified staff, in accor-
dance with local requirements .
PACKAGING AND UNPACKING
TRANSPORT
HANDLING AND INSTALLATION
WARNING: All handling and installa-
WARNING: The necessary connections
Means of transport
Lifting equipment
3413920_inst_GB

Publicidad

loading