ENGLISH
WARNING: Air inlets are required in
the room where the appliance is installed to
ensure a proper operation of the appliance
and to exchange the air in the room .
WARNING: The air inlets should be of
appropriate size, protected by gratings, and
placed so that they cannot be obstructed .
To assemble appliances in banks (side by side)
proceed as described below .
Connect the appliance using the screws (F) and
1)
the bracket (G) (rear part of the appliance) .
Connect the appliance using the screws (H)
2)
( supplied) and the bracket (E) (front part of
the appliance) .
1
F
G
Adjust the floor-mounted feet (A) to level the
appliance .
10
ROOM VENTILATION
ASSEMBLY APPLIANCES IN BANKS
2
H
E
F
LEVELLING
HANDLING AND INSTALLATION
Replace the control panels (B) and the knobs
3)
(A) on completion of the operation .
A variety of optional installation kits are availa-
ble for arranging appliances in banks (see "gene-
ral catalogue") .
3
A
3413920_inst_GB