Grundfos CU 362 Instrucciones De Instalación Y Funcionamiento página 18

6. Commissioning the product
6.1 Startup
After having carried out the mechanical, hydraulic and electrical
installation, proceed as follows:
1. Switch on the power supply.
2. Wait for the first display to appear.
3. The first time the CU 362 is switched on, there are two options:
• A configuration wizard guides the user through specific
settings.
• The user configures the system by use of PC Tools.
4. Follow the instructions in each display.
The system is now ready for operation.
Related information
6.3.1 Configuration by wizard
6.3.2 Configuration by PC Tool
6.2 Taking Dedicated Controls out of operation
Switch off the main switch to take the system out of operation.
WARNING
Electric shock
Death or serious personal injury
‐
The conductors in front of the main switch are still
energised.
‐
Lock the main switch with a padlock to ensure that it
cannot be accidentally switched on.
An individual pump is taken out of operation by switching off the
power supply to the corresponding motor-protective circuit breaker,
automatic circuit breaker or fuse.
It is recommended to stop one pump at a time. Stopping one pump
at a time minimises pressure surges in the discharge pipe.
6.3 Quick start
When the system is started up for the first time, the pumps are set
to "Out of operation". This ensures that the pumps do not start
until the system configuration has been completed. For information
about the CU 362 operator display, see Dedicated Controls,
Software description installation and operating instructions.
The Dedicated Controls can be configured and put into operation in
two ways:
• configuration by wizard
• configuration by use of PC Tools.
18
6.3.1 Configuration by wizard
When the system is started up for the first time, a step-by-step
configuration wizard will start. This configuration wizard helps the
user to configure the system. When the configuration is completed,
the system is ready for operation.
Configuration by wizard
Help
Press to display the relevant help text. All the elements in the
display have a selectable help text.
Wizard display setting Description
Display language Select the desired language.
Welcome -
Date and time Set date and time.
Units Select units.
Installation name Enter the installation name.
Primary settings Select the settings required.
Modules installed Select the modules installed.
Float switch function Select float switch function.
Select the type of level sensor
Set up level sensor
installed.
Analog inputs Set the analog inputs.
Start and stop levels Enter start and stop levels.
Warning -
Pump and system options -
Digital inputs Set the digital inputs.
Select and set up the
Communication settings
communication.
The system configuration is
completed, and the system is ready
for operation.
Configuration completed
To set up advanced functions, see
Dedicated Controls, Software
description installation and operating
instructions.