Grundfos CU 362 Instrucciones De Instalación Y Funcionamiento página 27

Digital outputs
6.5.5 User-defined functions
This display shows all functions (up to eight) defined by the user.
Each user-defined function is shown with two sources and the
selected functions. In the top right corner of each user-defined
function, the actual status is shown (Active/Not active).
See Dedicated Controls, Software description installation and
operating instructions.
Example
"User-def. function 1" has been activated by the 1st source, which
has been set to "Constantly high". The 2nd source has also been
set to "Constantly high".
"User-def. function 1" is linked to a digital output.
See Dedicated Controls, Software description installation and
operating instructions.
Path:Status > Electrical overview > User-defined functions >
User-defined functions
7. Maintenance
WARNING
Electric shock
Death or serious personal injury
‐
Before starting work on the pumps, make sure that the
power supply has been switched off.
‐
Lock the main switch with a padlock to ensure that it
cannot be accidentally switched on.
7.1 CU 362
The CU 362 is maintenance-free. Clean it with a dry or wet cloth.
Protect it from direct sunlight. Furthermore, the CU 362 temperature
must not be outside the ambient temperature range.
Related information
9.2 Ambient temperature
27