Publicidad
English
8 Rake
The rake moves the tines.
9 Tines
The tines shake the branches.
10 Key
The key is used to fit and remove the tines.
# Rating plate with the machine number
3.2
STIHL SPA 140.0 Cordless
Special Harvester
3
2
6
9
10
1 Button
The button is used to switch the harvester on
and off.
3
2 Cover
The cover is the placeholder for a Smart Con‐
nector 2 A.
3 Handle
The handle is for holding and controlling the
harvester.
4 Plug
The plug covers the socket and protects it
from moisture and dirt.
5 Socket
The socket receives the connecting cable
plug.
3
The cover is part of the handle housing. Only remove the cover to install a Smart Connector 2 A and
store it safely for later re-installation. Always use the harvester with the cover or Smart Connector 2 A
installed.
20
1
#
4
5
7
8
11
6 Power setting button
The power setting button is used to adjust the
speed of the rake.
7 Shaft
The shaft connects all components.
8 Clamp nut
Serves to adjust the length of shaft.
9 Rake
The rake moves the tines.
10 Tines
The tines shake the branches.
11 Key
The key is used to fit and remove the tines.
# Rating plate with the machine number
3.3
Symbols
Meanings of symbols that may be on the har‐
vester and battery:
In this button position the harvester
switches either on or off.
The clamp nut is unscrewed in this posi‐
tion. The shaft can be extended.
The clamp nut is locked in this position.
The shaft cannot be extended.
The speed of the rakes can be adjus‐
ted.
Do not dispose of the product with domes‐
tic waste.
4
Safety Precautions
4.1
Warning symbols
Meanings of warning symbols on the special har‐
vester or the battery:
Observe safety warnings and take the
necessary precautions.
Read and understand the User Manual
and keep it in a safe place for refer‐
ence.
Wear safety glasses and a hard hat.
4 Safety Precautions
0458-025-9901-A
Publicidad
