Publicidad
English
19 Specifications
19.1
STIHL SPA 130.0 and SPA
140.0 Harvesters
SPA 130.0
– Permitted batteries:
– STIHL AP together with "AP belt bag with
connecting cable"
– STIHL AR L
– Weight without battery: 2.6 kg
– Length: 2.20 m
– Degree of protection: IPX4 (protection against
splash water from any direction)
SPA 140.0
– Permitted batteries:
– STIHL AP together with "AP belt bag with
connecting cable"
– STIHL AR L
– Weight without battery: 3.1 kg
– Length: 1.85 m to 2.45 m
– Degree of protection: IPX4 (protection against
splash water from any direction)
For runtime, see www.stihl.com/battery-life.
19.2
Sound values and vibration val‐
ues
The K value for the sound pressure level is
2 dB(A). The K value for the sound power level is
2 dB(A). K-value for vibration level is 2 m/s².
STIHL recommends wearing hearing protection.
SPA 130.0
– Sound pressure level L
to ISO 22868: 80 dB(A).
– Sound power level L
EN 62841-4-2: 93 dB(A).
– Vibration level a
measured according to
hv
ISO 22867:
– Handle: 13.5 m/s²
– Shaft: 13.0 m/s²
SPA 140.0
Shaft fully compressed:
– Sound pressure level L
to ISO 22868: 79 dB(A).
– Sound power level L
EN 62841-4-2: 90 dB(A).
– Vibration level a
measured according to
hv
ISO 22867.
– Handle: 16.3 m/s²
– Shaft: 9.1 m/s²
Shaft fully extended:
30
measured according
pA
measured according to
wA
measured according
pA
measured according to
wA
– Sound pressure level L
to ISO 22868: 77 dB(A).
– Sound power level L
EN 62841-4-2: 91 dB(A).
– Vibration level a
measured according to
hv
ISO 22867.
– Handle: 12.6 m/s²
– Shaft: 18.5 m/s²
The sound and vibration levels indicated were
measured according to a standardized test
method and can be used as a basis for compar‐
ing electric power tools. The actual sound and
vibration levels may vary from the values indica‐
ted, depending on the type of application. The
sound and vibration levels indicated can be used
for an initial estimate of the sound and vibration
stress. The actual sound and vibration stress has
to be estimated. The times can be taken into
account in the estimate when the electric power
tool is switched off and also when it is switched
on but running without any load.
For information on compliance with the Physical
Agents (Vibration) Directive 2002/44/EC, see
www.stihl.com/vib.
19.3
REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
For information on compliance with the REACH
regulation see www.stihl.com/reach.
20 Spare Parts and Accesso‐
ries
20.1
Spare parts and accessories
These symbols indicate original STIHL
spare parts and original STIHL acces‐
sories.
STIHL recommends the use of original STIHL
spare parts and accessories.
Despite ongoing market observation, STIHL is
unable to judge the reliability, safety and suitabil‐
ity of other manufacturers' spare parts and
accessories; accordingly, STIHL cannot warrant
for the use of those parts.
Original STIHL spare parts and original STIHL
accessories are available from STIHL dealers.
19 Specifications
measured according
pA
measured according to
wA
0458-025-9901-A
Publicidad
