J.P. Bowlin Sartorius Cubis II Manual página 19

Device Description
3.5 Protective Caps and Covers for Connections
Fig. 7: Protective caps and covers on the rear wall of the weighing compartment, the back of the device, the underside of the device, and the
operating display
Pos . Name
1 Cover for rear wall of weighing compartment
2 Seal for conformity-assessed devices
3 Protective cap for USB connection
4 Cover for below-balance weighing
5 Cover for weighing module connection
6 Seal
18 Operating Instructions Cubis
1
1
Description
Installed in the rear wall of the weighing compartment.
Screwed onto the device and labeled with a sticker.
Removable.
Screwed on.
Screwed on.
Screwed on (not depicted).
| MCE Models
®
2 3 3 3
4
5 6