J.P. Bowlin Sartorius Cubis II Manual página 79

Technical Data
15.3 Ambient Conditions
Installation site
Standard laboratory rooms
Installation site according to IEC 60259-1, maximum altitude above
sea level
For indoor use only
Air pressure, maximum
Temperature
In operation
In operation, with isoCAL function*
In operation, without isoCAL function*
In operation, with conformity-assessed devices: see specifications
on the device ID label
During transport
Relative humidity
For temperatures up to 31 °C
Then linear decrease from 80% at 31 °C to 50% at 40 °C
* Scope of application as per Directive 2014/31/EU
15.3.1 Protection Class
IP Protection: Protected against dust and water (IP30)
15.4 Storage Conditions
Temperature
Dry
78 Operating Instructions Cubis | MCE Models
®
Unit Value
m 3000
mbar 600 – 1200
°C +5 – +40
°C +10 – +30
°C +17 – +27
°C -20 – +60
% 80
Unit Value
°C -20 – +60