J.P. Bowlin Sartorius Cubis II Manual página 82

15.9 Conditions for isoCAL Function
Possible Conditions for Triggering the isoCAL Function
In the event of a temperature change
After a time interval
After successful leveling
Only conformity-assessed devices: After interrupting the power
supply
Required Conditions for Executing the isoCAL Function
Operating display is in weighing mode (not in menu)
Alphanumeric inputs are not active.
Min. time period without entry on the device
Min. time period with unchanged loading of the weighing pan
Max. loading of weighing pan, high-capacity
15.10 Data Storage Device
Maximum number of data records
15.11 Integrated Clock
Maximum deviation per month (RTC)
15.12 Backup Battery
Lithium battery, type CR2032
Service life at room temperature, minimum
Unit Value
K 1.5
h 12
min 2
min 2
% 2
Value
150,000
Unit Value
s 30
Unit Value
Years 10
Operating Instructions Cubis
Technical Data
| MCE Models 81
®