J.P. Bowlin Sartorius Cubis II Manual página 39

Operating Design
4.8.11 Parameters in the "DATA.OUTP./COM.SBI" Menu
Parameter Settings
COM. OUTP. IND.NO*
IND.AFTER
AUTO W/O
AUTO W/
STOP.AUTO OFF*
ON
AUTO.CYCL. EACH VAL*
2nd VALUE
INTERV.
FORMAT 16 CHARS
22 CHARS*
EXTR.LINE
AUTO.TARE OFF*
ON
* Factory setting
4.8.12 Parameters in the "DATA.OUTP./PRNT.PARA." Menu
Parameter Settings
ACTIVAT. MAN. NO
MAN.AFTER*
INTERV.
AUTO.LC
FORMAT 22 CHARS*
EXTR.LINE
* Factory setting
38 Operating Instructions Cubis
Explanations
Starts the data output after pressing the key or software command as an
individual value without stability.
Starts the data output after pressing the key or software command as an
individual value after stability.
Activates the automatic data output without stability.
Activates the automatic data output after stability.
Deactivates the option to abort the automatic data output.
The automatic data output is aborted by pressing the [PRINT] key or a
software command.
Starts the automatic data output with a cycle after each value.
Starts the automatic data output with a cycle after every 2nd value.
Starts the automatic data output with the output rate set under "INPUT /
INTERV."
Data output provides 16 characters per line (16 characters only for the measured
value).
Data output provides 22 characters per line (16 characters for the measured
values and 6 characters for identifiers).
Data output provides an additional line with the date, time, and weight value.
Deactivates automatic taring after data output.
The device automatically tares after data output.
Explanation
Manual without stability: Print process can be started manually at any time.
Manual after stability: After pressing the [Print] key, the print command is
only executed once stability is achieved.
Starts the automatic data output with the output rate set under "INPUT /
INTERV."
Automatically at load change: Print process starts after every load change.
Printer output prints 22 characters per line (16 characters for the measured
value and 6 characters for identifiers)
Printer output prints an additional line with the date, time, and weight value.
| MCE Models
®