Tenda N Serie Guía De Instalación Rápida página 5

Port
Grounding terminal.
Connect the grounding terminal of the NVR to the earth or the ground terminal of the building
with a grounding cable to prevent static electricity or lightning from damaging the NVR.
Power port.
POWER
Use the included power adapter to power on the NVR.
Fast Ethernet port, which supports IEEE 802.3af/at PoE power supply. Used to connect to
cameras.
Tips
PoE
- Recommended Ethernet cable: CAT 5 or better.
PORTS
- Power supply distance:
• Normal Mode (default): Up to 100m
• Long-range Mode: Up to 250m
Fast Ethernet LAN port.
LAN
Used to connect to such devices as the router and switch.
Audio input port.
AUDIO
Used to connect to the audio input devices , such as pickups.
IN
Audio output port.
AUDIO
Used to connect to audio output devices, such as active speakers.
OUT
HDMI port.
HDMI
Connect your monitor or TV to this port using an HDMI cable for audio and video output.
VGA port.
VGA
Connect your monitor to this port using a VGA cable for video output.
USB 2.0 port.
USB
Used to connect to such devices as a mouse and a USB storage device.
I Install the HDD
The appearance NVRs may vary with models. The following information is only for reference. Please install
the HDD matching the model you actually purchased.
This product does not include any HDD, and the HDD dedicated for surveillance is recommended. You
may need a screwdriver during installation. Please prepare it by yourself.
Tips
When installing or replacing the HDD, please cut off the power supply of the NVR, otherwise the HDD may not be
detected or even be damaged.
Use a screwdriver to unfasten the screws, then remove the cover of the NVR. Reserve the screws for
later use.
Flip
Plastic shell NVR (Example: N3L-8H)
- 3 -
Description
Remove the cover
POWER HDMI VGA LAN USB1 USB2