Tenda N Serie Guía De Instalación Rápida página 6

Take out 2 screws from the NVR installation package, and screw them into the two screw holes
closest to the SATA connector. Reserve about 2 mm between the screws head and the HDD for
subsequent installation.
SATA connector
Align the SATA connector of the HDD with the SATA slot on the motherboard of the NVR, and then
insert the HDD into the slot until it is tightly fixed.
HDD
Plastic shell NVR (Example: N3L-8H)
Take out the remaining screws from the NVR installation package, and screw them into the HDD
screw holes to fix the HDD.
Plastic shell NVR (Example: N3L-8H)
Mount the cover with the previously removed screws.
Plastic shell NVR (Example: N3L-8H)
Metal shell NVR (Example: N3104-4P)
HDD
- 4 -
HDD
HDD
Metal shell NVR (Example: N3104-4P)
Metal shell NVR (Example: N3104-4P)
Metal shell NVR (Example: N3104-4P)