Tenda N Serie Guía De Instalación Rápida página 8

III Basic configuration
Local management
Startup
Tips
Use the included power adapter to power on the NVR. The NVR may fail to work normally or even be damaged due to abnormal power supply.
Connect the included power adapter to the power port of the NVR, and plug the power adapter into the
power socket to start up the NVR.
Shutdown
Note
Do not directly cut off the power supply of the NVR to force a shutdown; otherwise, the HDD may be damaged, videos may be lost, or even the
NVR may be damaged.
After connecting the mouse and monitor to the NVR, perform the following settings on the NVR's web UI
(exit the Full Screen interface): Click
When The Device is Shut Down. Please Cut Off the Power appears on the screen, unplug the power
adapter of the NVR.
Quick setup
After connecting the mouse and monitor to the NVR, you can perform quick setup.
The GUI of the NVR may vary with models. The actual GUI prevails. The N3L-8H is taken as an example
here.
Set Login Password, enter your Email Address, then click Activate.
If you want to use a pattern to unlock the web UI, draw an unlock pattern. Otherwise, click Do Not Use
Unlock Pattern and skip to step
in the upper right corner, click Shutdown
Device Activation
User Name
Password
Confirm Password
Email Address
.
Unlock Pattern
admin
8 to 32 characters
Re-enter the login password
Only for resetting the password
Activate
Network
Draw an Unlock Pattern
Redraw
Do Not Use Unlock Pattern
- 6 -
, and then click OK.
Shutdown
Cloud