WARNING!
In order to activate the Tech-Air
Zip (1) MUST be correctly closed, taking care that the System is
positioned correctly on the shoulders, chest and back area.
WARNING!
Always ensure that the Activation Zip (1) remains open and unzipped
when the Tech-Air
the LEDs to verify that the System is not turned on or manually
switch off the System using the System Button (4a) (see instructions
reported in Section 6.4 "Switching off the System").
Once the Activation Zip (1) has been correctly closed, the System starts to turn on and the
User MUST check the correct System functioning verifying that the following steps are
performed:
1) LED Check: during this phase the System will check if all the available LEDs are correctly
functioning. The User will see that all the available LEDs (4c, 4d, 4e) will turn on SOLID
GREEN for approximately one second and then will turn off (Figure 9);
Off-Road System, the Activation
®
Off-Road System is not worn by the User; check
®
Figure 9: LED check phase
21 EN