Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 22

After System activation, the User can also check the System battery level by looking at the
Battery LED (4e).
WARNING! The User MUST ALWAYS check the LED Display (4) after the LED
Check to confirm that the SOLID BLUE Status LED (4c) is turned on
before starting to ride/use the Tech-Air
deploy if the SOLID BLUE Status LED (4c) indicator is NOT present.
Tip: If the System does not switch on (i.e. if there are no LEDs showing on the
LED Display [4]) check that the Activation Zip (1) has been correctly closed.
In addition, check that the Tech-Air
charge. If the problem persists, contact Tech-Air Support (see Section 21
"Tech-Air
®
The battery and the status of the Tech-Air
connecting the System to the Tech-Air
Tech-Air App will display the LED light indication "System On".
®
Tip: The User can put the System in Transportation Mode (Section 16.4) by
holding down the System Button (4a) for at least 5 seconds, forcing the
System to switch off. The user can switch on the System by simply opening
and closing the Activation Zip (1) again.
6.2 Changing the Riding Mode
As previously stated, the Tech-Air
Enduro, Rally and Street. After the System has been correctly switched on, the User can
easily switch between the three different Riding Modes by pressing the System Button (4a)
for 2 seconds. A SOLID GREEN LED will appear on the Riding Mode LED (4d) indicating which
Riding Mode is currently running (Figure 12).
WARNING! After the first System activation or any System Software update, the
ENDURO Mode will be selected as the DEFAULT Riding Mode. In all
other cases, after the System is switched on, the System will run the
LAST SELECTED Riding Mode.
Support").
Off-Road System offers three possible Riding Modes:
®
System. The System will NOT
®
Off-Road System has a sufficient
®
System can also be checked by
®
App. When the System is active, the
®
23 EN