Descargar Imprimir esta página

Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 54

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 306
21. Tech-Air
Support
®
In case of questions or should users need further information, they may contact the Tech-
Air
Dealer where they purchased the System or Alpinestars directly:
®
E-mail: techairsupport@alpinestars.com
Tel: +39 0423 5286 (asking for Tech-Air
Support)
®
22. Certification Information
The Tech-Air
Off-Road System is manufactured by:
®
Alpinestars SpA
5, Viale Fermi – Asolo (TV) 31011 Italy
And it is covered by a number of certifications.
Personal Protective Equipment
The Tech-Air® Off-Road System - ABSOR23 and all the included protective parts are a
Category II certified PPE (Personal Protective Equipment) under European Regulation
(UE) 2016/425. This product is in compliance also under the corresponding UK legislation
(Regulation 2016/425 on personal protective equipment as it applies in GB).
For each PPE included in the Tech-Air® Off-Road System and itself, the notified bodies and
certifications information contained in the product markings are reported in the Annex I of
this manual.
EU declaration of conformity & UKCA declaration of conformity
The EU Declaration of Conformity of this PPE can be downloaded at:
eudeclaration.alpinestars.com
The UK Declaration of Conformity of this PPE can be downloaded at:
ukdeclaration.alpinestars.com
Protective garments for motorcycle riders
The degree of risk or hazard that a motorcyclist will face is closely linked to the type of
riding and the nature of the accident. Riders are cautioned to carefully choose motorcyclists'
protective garments that match their riding activity and risks. Other garments or garment
combinations certified according to the EN 17092 series of standards may provide more
appropriate protection than this garment but there may be weight or ergonomic or heat
stress penalties associated with their use, that may be less appropriate for some riders
The Technical Standard EN 17092:2020 requires that motorcycle protective garments must
fulfill with mechanical requirements according to the relevant class of protection set
55 EN

Publicidad

loading