Alpinestars TECH-AIR OFF-ROAD Manual Del Usuario página 60

Standard
Used for
Tested Area Tests method
applied in
tests
Elbow EN 1621-1:2012
Shoulder EN 1621-1:2012
Sizing & fitting info regards the limb joint protectors integrated onto the System
There are two protector types – Type A and Type B, these refer to the size. Type B protectors
are larger than Type A protectors. Where the protector is located within a garment, the
most suitable type of protector has already been selected for that garment style and size.
In the case of the Tech-Air
better fits with the chosen size are selected by Alpinestars.
The following table explains and summarizes the passive elbow and shoulders protectors
sizes already installed in your vest:
Base Layer Size International Size MAN
S 42-44
M 46-48
L 50-52
XL 54-56
2XL 58-60
WARNING! NEVER USE THE PRODUCT WITHOUT THE REMOVALBLE PROTECTORS.
Temperature
23°
23°
Off-Road System the elbow and shoulder protectors' type that
®
Elbow protector size
Type B
Type B
Type B
Type B
Type B
Level
Force
Level 1 requirements:
Transmitted
average value ≤ 35kN; No
with Impact
impact above 35kN (Zone
Energy
A), 50kN (Zone B and C)
of
50 Joule
Level 2 requirements:
Value
average value ≤ 20kN; No
Average/
impacts above 20kN (Zone
Maximum
A), 30kN (Zone B and C)
Average ≤ 35kN
Peak ≤ 35kN
(Zone A) Level 1
Peak ≤ 50kN
(Zone B and C)
Average ≤ 35kN
Peak ≤ 35kN
(Zone A) Level 1
Peak ≤ 50kN
(Zone B and C)
Shoulder protector size
Type B
Type B
Type B
Type B
Type B
61 EN