Operating States/Error Signals; Signals For Operating States; Warnings/Error Signals - Ottobock Kenevo 3C60 Instrucciones De Uso

The component supports the "Bluetooth Classic" and "Bluetooth Low Energy"
Bluetooth technologies
Declaration of conformity according to the applicable European directives
Serial number
YYYY – year of manufacture
WW – week of manufacture
Lot number
Protect from moisture
Protection against penetration of solid foreign objects with a diameter greater than
12.5 mm, no protection against water
Protection against penetration of solid foreign objects with a diameter greater
than 12.5 mm, protection against water dripping diagonally up to 15°.
Caution, hot surface

13.2 Operating states/error signals

The prosthesis indicates operating states and error messages through beeps and vibration sig­
nals.

13.2.1 Signals for operating states

Battery charger connected/disconnected
Beep signal
1 x short
1 x short

13.2.2 Warnings/error signals

Error during use
Beep signal
Vibration signal
None
3 x short
1x before beep signal Battery charger disconnected after start of char­
Vibration signal
1 x long at interval of
approx. 5 seconds
Event
Battery charger connected or
battery charger already disconnected prior to
start of charging mode
Charging mode started (3 sec. after connecting
the battery charger)
ging mode
Event
Overheated hydraulic
unit
Required action
Reduce activity.
63