Operating States/Error Signals; Status Display On The Control Panel - Ottobock C-Brace 17KO1 Serie Instrucciones De Uso

In some jurisdictions it is not permissible to dispose of these products with unsor­
ted household waste. Disposal that is not in accordance with the regulations of
your country may have a detrimental impact on health and the environment. Please
observe the instructions of your national authority pertaining to return and collec­
tion.
Type BF applied part
Compliance with the requirements according to "FCC Part 15" (USA)
Non-ionising radiation
Compliance with the requirements under the "Radiocommunications Act" (AUS)
Declaration of conformity according to the applicable European directives
Manufacturer
Protected against dust, protected against splashing water
Serial number
Article number

15.2 Operating states/error signals

The orthosis indicates operating states and error messages with symbols on the control panel and
through beeps and vibration signals.

15.2.1 Status display on the control panel

The current status of the component is displayed on the control panel for 5 seconds in the follow­
ing cases:
• The button on the control panel was pressed briefly.
• The component was switched on by pressing the
• The battery charger was disconnected from the component.
• Battery charger was connected to the component.
• An error was identified during use.
92
button.