Silvercrest SHLFDD 2400 A1 Instrucciones De Uso página 20

 Press the zone  selection button () to configure the settings for fryer drawer  ().
The default setting is a cooking time of  minutes and a temperature of °C.
You can adapt an automatic programme (see following section) or the default setting
specified above to suit your recipe.
 Use the
() and
°C increments. Press and hold the button longer to set the required temperature more
quickly.
The temperature in °C is shown on the display field () for fryer drawer  and on the
display field () for fryer drawer .
The temperature is saved.
Cooking temperatures of between °C and °C can be set.
 Use the
() and
increments. Press and hold the button longer to set the required cooking time more
quickly.
The cooking time is shown on the display field () for fryer drawer  and on the display
field () for fryer drawer .
It is possible to set a maximum cooking time of  minutes.
The cooking time is saved.
 Press the zone  selection button () to configure the settings for fryer drawer  ().
Then set the cooking time and temperature. Proceed as described above.
 Start the cooking process by pressing the
You can also begin by configuring the settings for zone .
The cooking process starts for both fryer drawers with the respective settings. The button
() flashes during the cooking process.
 - English
() buttons to set the cooking temperature you require in
() buttons to set the cooking time you require in minute
button ().