Publicidad
Idiomas disponibles
Idiomas disponibles
dehydration temperature manually as required.
Use the
() and
The dehydration temperature is shown on the display field () for fryer drawer and
on the display field () for fryer drawer .
A dehydration temperature of –°C can be set.
Use the
() and
minute increments. The dehydration time is shown on the display field () for fryer
drawer and on the display field () for fryer drawer .
It is possible to set a maximum dehydration time of hours ( minutes).
Start the dehydration process by pressing the
At the end of the dehydration time, the heating element switches off and signal tones are
emitted.
To stop the dehydration process early, press the standby button
seconds until the appliance switches off for both zones.
Pull the mains plug () out of the mains socket.
Pull the fryer drawers (/) out of the appliance using the cool-touch handles (/).
Place the fryer drawers on a heat-resistant surface.
Remove the dehydrated food from the fryer drawers using a suitable tool.
. Cleaning the air fryer
WARNING!
Risk of electric shock!
There is a risk of electric shock due to live parts.
Always disconnect the mains plug () before cleaning.
Never immerse the appliance in water or other
liquids. If the appliance does fall into liquid, under no
circumstances should you attempt to touch it. First, unplug
from the mains socket.
Do not operate the appliance again under any
circumstances. Have the appliance checked by the
manufacturer, its customer services department or a
similarly qualified person.
- English
() buttons to set the dehydration temperature you require.
() buttons to set the dehydration period you require in
button ().
() for a few
Publicidad
