Max. fuel tank capacity, l/gal
Drive speed, m/min or ft./min
Engine oil capacity, l/gal
Grease for the bearings of the shot blaster head
Battery
Battery type
Operating conditions, maximum gradeability
Operating temperature, °C/°F
Relative humidity max, %
Vibration level in the seat, m/s
Hydraulic system
Working pressure, bar/psi
Hydraulic tank capacity, l/gal
Hydraulic oil type
Note:
If your product requires an electrical
specification that is not in the table, speak to a
Husqvarna service agent for more information.
Approved abrasive material
Approved abrasive material
in./mm
*special operations
Noise emissions
Sound power level, LWA dB (A)
Sound pressure level at the operator's ear, LP dB (A)
5
Sound power level determined according to EN ISO 3747. Measured on concrete surface. Uncertainty Kwa
2.5 dB
6
Sound pressure level determined according to EN ISO 11202. Measured on concrete surface. Uncertainty
Kpa 2.5 dB
2291 - 001 - 17.05.2024
2
2
or ft/s
S-390
0.05/1.2
5
High carbon steel shot
S-460
0.06/1.4
6
BMR 75D
50/13.2
100.6 or 330
1.7-1.9/0.42-0.50
LGWA 2/0.4, high load, extreme
pressure, wide temperature, bearing
grease
12v AGM 50AH
23-104/-5–+40
95
0.3 or 0.914
130/1885.5
34.8/9.2
Mobil ATF D/M
S-550*
0.07/1.7
BMR 75D
100.4
85
29