Publicidad
Idiomas disponibles
Idiomas disponibles
•
Do not start the product if there is fuel or engine
oil on the product. Remove the unwanted fuel and
engine oil and let the product dry before you start the
engine.
•
Examine the engine for leaks regularly. If there are
leaks in the fuel system, do not start the engine until
the leaks are repaired.
•
Do not use your fingers to examine the engine for
leaks.
•
Keep fuel in approved containers only.
•
When the product and fuel is in storage, make sure
that fuel and fuel fumes cannot cause damage.
•
Drain the fuel in an approved container outdoors and
away from sparks and flames.
Exhaust fumes safety
WARNING:
instructions that follow before you use the
product.
WARNING:
the engine contain carbon monoxide
which is an odourless, poisonous and
very dangerous gas. To breathe carbon
monoxide can cause death. Because carbon
monoxide is odourless and cannot be seen,
it is not possible to sense it. A symptom
of carbon monoxide poisoning is dizziness,
but it is possible that a person becomes
unconscious without warning if the quantity
or concentration of carbon monoxide is
sufficient.
•
Exhaust fumes also contain unburned hydrocarbons
including benzene.
•
Long-term inhalation of exhaust fumes can cause
health problems.
•
Exhaust fumes that you can see or smell also
contain carbon monoxide.
•
Do not breathe in the exhaust fumes.
•
The exhaust fumes from the engine are hot and
may contain sparks which can start a fire. Always
keep firefighting equipment nearby. Never start the
product near combustible material.
Fire extinguisher
•
Keep a fire extinguisher near during operation.
•
Use a powder fire extinguisher of "ABE" class or a
carbon dioxide fire extinguisher of "BE" type.
Work area safety
WARNING:
instructions that follow before you use the
product.
8
Read the warning
The exhaust fumes from
Read the warning
•
It is the responsibility of the user to analyse the
surface to be treated. The user should make a risk
assessment on the basis of the information obtained
about the surface to be treated and take proper
precautions for the work to be performed.
•
Do not use the product in fog, rain, strong winds,
cold weather, risk of lightning or other bad weather
conditions.
•
Look out for persons, objects and situations that can
prevent safe operation of the product.
•
Do not use the product in areas where fire or
explosions can occur. The product creates sparks
and flammable material can create ignition with the
dust or fumes.
•
Keep children, bystanders and animals away from
the work area and at a safe distance from the
product. Safe distance is 10 m/33 ft.
•
Make sure that bystanders and animals are not
in the work area and at a safe distance from the
product.
•
Make sure that only approved persons are in the
work area.
•
Keep the work area clean and fully illuminated.
Cluttered or dark areas invite accidents.
•
Remove objects such as screws, bolts, wires and
stones from the work area before you use the
product.
•
Make sure that there are no cables or hoses in the
operation direction of the product.
•
Make sure that uneven surfaces, such as welded
seams or floor joints, do not stop the product.
•
Make sure that there is sufficient airflow in the work
area.
2291 - 001 - 17.05.2024
Publicidad
