Throttle Friction Adjuster; Throttle Grip - TOHATSU BFT 60A Manual Del Propietário

Ocultar thumbs Ver también para BFT 60A:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

OPERATION
THROTTLE FRICTION
ADJUSTER
FAST
FIX
RELEASE
FAST
3. Turn the throttle grip in the FAST
direction to increase the speed. For
the sake of fuel economy, open the
throttle about 80%.
82

THROTTLE GRIP

To hold the throttle at a steady
setting, turn the throttle friction
adjuster clockwise. To free the
throttle grip for manual speed control,
turn the friction adjuster
counterclockwise.
• When cruising at full throttle, note
that the engine speed must be in the
range between 5,000 min
-1
and 6,000 min
(rpm).
• If you feel that the engine speed
jumped up when the hull jumped or
at ventilation, cruise the boat by
returning the throttle to the slow
speed side.
• See "Propeller Selection" (page 52)
for a relation between the propeller
and the engine speed.
Do not operate without the engine
cover. Exposed moving parts could
cause injury; water may damage
the engine.
For best performance, passengers and
equipment should be distributed
evenly to balance the boat.
-1
(rpm)

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Bfw 60a

Tabla de contenido