Tunturi C85 Manual Del Usuario página 4

FRONT FRAME
Connect the cords from the front and rear frame
1.
tube with each other.
Connect the frame tubes with each other.
2 .
Do not damage the console cord!
PLEASE NOTE:
Tightly fasten the frame tubes with four allen
3 .
screws ( ),
C
HANDLES
Unscrew the fastening screw of the plastic cover
1.
at the upper end of the front frame tube and turn the
cover aside.
Set the handle at the end of the shaft and thread the
2 .
adjustment key cord from the handle over the shaft
into the front frame tube.
4
Thread the adjustment key cord through the round
3 .
console support tube in the front tube so that the cord
comes out from the upper end of the console support
tube.
Do not let the cords fall into the front frame
CAUTION!
tube!
Push the handle onto the shaft simultaneously
4 .
pulling upwards the adjustment key cord from the
console support tube.
Lock the handle by fastening the base plate (
5 .
the allen screw ( ) at the end of the shaft.
E
) and
D