Fwa Unit Description - Bosch FWA 4310 Instrucciones De Funcionamiento

en 28 | FWA 43xx / 44xx | Product description
3 .2

FWA unit description

Together with the trolley, the FWA 43xx / 44xx is
suitable for mobile applications at various measurement
bays.
The basic version consists of a trolley with monitor,
keypad, mouse, mouse pad, PC, printer and the radio
sensors. Mounts for storage of the sensors are
integrated into the side panels of the trolley. On
plugging in the sensors, the batteries of the radio
sensors are charged automatically (even if the multiple
socket outlet is not switched on).
!
Always detach the sensors when transporting the
trolley as otherwise the sensors could be damaged
or the settings altered.
Fig. 1: Front view of FWA 43xx / 44xx with accessories
1 Monitor
2 Keypad
3 Mouse
4 Printer
5 Sensors (MWA) at charging stations
6 PC unit
7 Turntable
3
8 Sensor cable set
9 Receptacles for cable set
1)
Release connectors to unplug. Do not unscrew as this would
1)
destroy the connector.
The sensors are charged when the FWA is connected to the
2)
mains regardless of whether the multiple socket outlet is
switched on or off.
Depending on version
3)
|
1 690 326 001 2008-09-17
2)
Fig. 2: Back view of FWA 43xx / 44xx
1 Multiple socket outlet
2 Cable holder
3 Steering wheel arrester
4 Brake clamp
5 Distributor box (cable) or measurement box (radio)
!
The distributor or measurement box is supplied
with voltage directly via the power cord and is not
switched on and off by way of the multiple socket
outlet. The FWA is therefore to be disconnected from
the mains during long periods of non-use (unplug
mains connector).
Robert Bosch GmbH