38
ENGINE OPERATION
1. Main switch key
2. Warning lamp
ENOW00032-1
Do not hold turning starter motor more than
5 seconds, or the battery may be consumed,
potentially making the engine star ting
impossible and/or damaging the starter.
If cranking over 5 seconds fails to star t
engine, return main switch to "ON", and
crank engine again after 10 seconds or more.
7. Check the cooling water from cool-
ing water check port.
7
Side mount RC type
1. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
operator or to the operator's PFD
(Personal Flotation Device.)
1. Stop switch lock
2. Insert the main switch key.
CAUTION
ENOF00868-0
1
ENOF00869-1
3. Set the control lever in the Neutral
position. Do not raise the free throt-
tle lever when starting the engine.
1
N
3
1. Neutral (N)
2. Control lever
3. Fully opened (Forward)
4. Fully opened (Reverse)
5. Free throttle lever
6. Main switch key
7. Stop switch
4. Turn the main switch key to ON posi-
tion and c onfirm thre e warning
lamps light up with buzzer sound and
then go off.
1. Warning lamp
5. Turn the main switch key to START
position and release the key when
the engine has star ted. The key
returns to the original position,
automatically.
2
5
4
6
7
ENOF00870-1
1
1
ENOF00851-0
ENOF00851-0