Suunto Training Manager; Installing The Software - Suunto t6 Guía Rápida

9. SUUNTO TRAINING MANAGER

9.1. Installing the software

To install Suunto Training Manager:
1. Insert the Suunto Training Manager CD-ROM into the drive.
2. Wait for the installation to begin and follow the installation instructions.
Note: If the installation does not automatically start, click Start --> Run, and type
D:\setup.exe.
During the installation process Suunto Training Manager asks for your personal
background data such as Age, Weight, Height, Gender, and Activity class. The
software uses these parameters to calculate your personal Training Effect levels
and for analyzing your training logs.
9.2. Installing the USB drivers
These instructions assume that you are installing Suunto Sports Instrument drivers
on a clean system, i.e. one that does not contain any Suunto Sports Instrument
drivers. If this is not the case, uninstall the previously installed drivers before
proceeding with the installation. See Suunto t6 User Manual for more information.
The installation is in two parts. First you install the drivers for the Suunto Sports
Instrument and then for the virtual USB serial port.
16