Husqvarna TC 250 2009 Manual De Uso página 113

MUM2-250_310_450_510_2009_GB
To replace the fluid, proceed as follows:
- Remove the rubber cap on the bleeding valve (1) or (1A).
- Attach a clear plastic hose to the bleeding valve on the brake
caliper and turn the other end of the hose into a container.
- Remove fluid reservoir cap (2)or (2A: 21 mm wrench) and
the rubber.
- Loosen bleeding valve on the brake caliper.
18-11-2008 11:18 Pagina 47
1
1A
47