Stopping The Motorcycle And The Engine - Husqvarna TC 250 2009 Manual De Uso

MUM1-250_310_450_510_2009_GB

STOPPING THE MOTORCYCLE AND THE ENGINE

- Close the throttle (1) completely so that the engine will help
slow down the motorcycle.
- For normal braking, gradually apply both front and rear
brakes while down shifting (for maximum deceleration, ap-
ply the front and rear brakes firmly).
- When stopped, pull the clutch lever and shift gear lever (2)
in neutral position.
18
18-11-2008 11:09 Pagina 18
- Press the engine stop RED button (3).
- Close the fuel cock (4).
- Turn towards left the ignition key.
WARNING*: Independent use of the front or
rear brake may be advantageous under
certain conditions. Use caution when using
the front brake, especially on slippery sur-
faces. Improper use of the brakes can lead
to a serious crash.
2
3
WARNING*: In the event of stuck throttle or
other malfunction which causes the engine
to run uncontrollably, immediately depress
the engine stop button and hold it down.
Control the motorcycle by normal use of the
brakes and steering while holding the en-
gine stop button down.
4