Wheel Rim Axle Bending - Husqvarna TC 250 2009 Manual De Uso

MUM2-250_310_450_510_2009_GB
OVERHAULING THE WHEELS
The tables hereunder show the type of control the rim and
wheel axle are to be submitted to.
Note*: if the rim is badly, it should be re-
placed.
54
18-11-2008 11:19 Pagina 54
DEFORMATION RIM
Side skid
Eccentricity

WHEEL RIM AXLE BENDING

If the bending figure is over the allowable max. limit, straight-
en or replace the axle.
If the wheel axle cannot be straightened within the max. limits
(0,2 mm - 0,008 in.) stated, replace it.
WHEEL SPOKES
Check to make sure that all the nipples are tight; tighten them
if necessary.
STANDARD MAX.LIMIT
Remember that an insufficient stretch jeopardizes the motorcy-
cle stability.
less than 0,5 mm
For an instant check, use a metal point (for instance, a screw-
(0.02 in)
driver) to beat the spokes with. A live sound accounts for an ac-
2 mm
curate tightening, while a dull sound means that a new tighten-
(0,078 in)
less than 0,8 mm
ing is necessary.
(0.03 in)