Adjusting The Carburettor - Husqvarna TC 250 2009 Manual De Uso

MUM1-250_310_450_510_2009_GB

ADJUSTING THE CARBURETTOR

Adjust the carburettor with warm engine and with the throttle
in closed position.
Work as follows:
- Turn slow running adjusting screw (1) on the left side of the
bike, , until the engine is turning over at fairly high rpm
(turn the screw clockwise to increase the rpm, and anticlock-
wise to descrease the rpm).
- Turn adjusting screw (2) clockwise until the fully closed posi-
tion is reached then turn back 1+ 1/2 turns
- progressively loosen adjusting screw (1) to obtain the slow
running required.
ADJUSTING THE IDLE
Adjust the carburetor with warm engine and with the throttle
control in closed position. Proceed as follows:
- Turn slow running adjusting screw (1) on the left side of the
bike, near the fuel cock (turn the screw clockwise to increase
the rpm, and anticlockwise to descrease the rpm).
18-11-2008 11:09 Pagina 23
1
23