Husqvarna TC 250 2009 Manual De Uso página 117

MUM2-250_310_450_510_2009_GB 18-11-2008 11:19 Pagina 51
- Attach a clear plastic hose to the bleed valve (1) on the
REAR BRAKING SYSTEM BLEEDING
caliper and turn the other end of the hose into a container.
The braking system must be bled after the fluid replacement
or when, due to air in the circuit, the pedal stroke is long and
spongy.
To bleed the system:
- Remove the reservoir cover (A) (21 mm wrench) rubber boot
and top up with (DOT 4) brake fluid.
1
51