Co M M A N D S A N D Co N T R O L; Function Of All The Controls); Use Of The Machine) - EMAK CR 270 Serie Manual De Uso Y Manitenimiento

and stable surface, with enough space
for handling the machine and its
I
packaging, always making use of
suitable equipment.
Before starting the engine, check the oil level
GB
a n d g a s o l i n e re f u e l i n g, fo l l o w i n g t h e
instructions given in the engine manual.
F

5. CO M M A N D S A N D CO N T R O L

INSTRUMENTS (Fig.2)
D
WARNING: Learn the positions and
functions of all controls and all control
devices. Learn the meaning of all
symbols and indicators on the controls,
E
before using the machine.
Keep handles and levers clean, dry and free
NL
from all traces of oil, fuel, general dirt or ice.
Clutch lever (1) - Use this lever to engage or
P
disengage the clutch. The crawlers rotate if the
lever is lowered, when the engine is running. When
the lever is released, the clutch is disengaged and
the parking brake automatically engages.
H
Left crawler unlock lever (2) - Pull the lever to
rotate the machine to the left.
SK
Accelerator lever / choke (3) - This regulates
the engine's rpm. The positions are indicated on
CZ
a label showing the following symbols:
RUS
STARTER position for cold starting,
UK
SLOW position for minimum engine speed,
PL
FAST position for maximum engine speed.
FIN
WARNING: In the Honda engine, this
lever, also has the power off function 0
BIH
(OFF).
SRB
HR
Right crawler unlock lever (5) - Pull the lever
to rotate the machine to the right.
Starter Handle (6) - It must be used to start the
engine.
24
Gearshift lever (8) - It has five positions:
N = Disengagement position
F1 = First forward speed clutch engagement
F2 = Second forward speed clutch engagement
R1 = First reverse speed clutch engagement
R2 = Second reverse speed clutch engagement
WARNING: The gear change must be
made at a standstill (clutch lever (1)
released).
Lock lever body (9) - With this release the lever
body to be able to raise the position of tipping.
WARNING: Lock the transport box
down, before moving the machine.
Off lever (only for Emak engine) (10) - Pull the
lever down to stop the engine.
CAUTION: To start the engine, it is
necessary to first lift the lever.
6. INSTRUCTIONS FOR USE
Prohibited uses
WARNING: Use the machine only for the
transport of objects or loads within the
limits of weight and volume indicated,
with the limitations specified in this
manual. Any other use is considered
prohibited and shall void the warranty
and manufacturer's liability, leaving the
user liable for costs deriving from
damage or injury to the user or to
others.
The following are also considered prohibited
uses:
- Drive the machine from inside of the
transport box.
- Drive sitting or standing on the machine.
- Carrying persons or animals.
- Use the machine to break down walls, poles,
fences, etc..
- Use the machine to crush and/or compact
leaves, trash, containers, bulk material, etc..
The sudden collapse of the crushed material
can unbalance the machine.
- Use counterweights (the manufacturer does
not provide them), or persons, in order to