Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
3.7. Adjusting the harness and headrest height in
an installation with a 5-point harness. Groups
0+/1
Proper adjustment of the height of the harness
ensures the child will be seated correctly. The
harness should be adjusted to the height of the
child's shoulder or slightly above; never behind the
child's back or level with the ears (fig. 7).
IMPORTANT! The shoulder straps should not be
passed behind the child's back at or above ear level.
1. Loosen the harness straps by pulling them gently
while pressing the harness adjustment button
(fig. 2).
2. Pull the headrest height adjuster
headrest
(1)
at the same time. Select the correct
height for the shoulder straps
the correct position for the child by releasing the
adjuster (fig. 6).
3.8. Adjusting the headrest. Groups 2/3.
A correctly adjusted headrest ensures that the
diagonal part of the safety belt is ideally positioned,
offering the child the best possible protection.
The headrest should be adjusted so that a space
equivalent to two fingers remains between the
headrest and the child's shoulders.
To adjust the height of the headrest:
1. Pull the headrest height adjuster
headrest at the same time. This will unlock the
40
(13)
(9)
and the
(10)
and fix them in
(9)
and the
headrest (fig. 6).
2. Now you will be able to move the headrest to the
desired height. When the adjuster is released the
headrest will remain locked in the chosen position.
3. Place the safety seat on the car seat.
4. Sit the child in the seat and check the height. Repeat
the process until the correct height is achieved.
(9)
Headrest and
fig. 6
harness height
adjuster.
fig. 7
Publicidad
Tabla de contenido
