Babyauto More Werdu RWF DS15 Manual De Instalación página 46

Ocultar thumbs Ver también para More Werdu RWF DS15:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

6.1 Connecting the Isoclick Fix® arms in a
rearward-facing installation (optional).
1. Make sure the Isoclick Fix arms are displayed to
install the car seat forward facing (group 1/2/3)
(fig. 9).
2. Place the seat in the back seat of the vehicle in the
direction of travel.
3. Hold the safety seat with both hands and insert the
two Isoclick Fix arms
(26)
guides
until they fasten with a click on both
sides. The red button will partially change to green
on both sides (fig. 20).
4. Shake the seat to check that it is correctly anchored
to the vehicle's ISOFIX points.
6.2 Fastening the seat with the vehicle's belt in a
forward-facing installation. Group 1
1. Place the seat in the back seat of the vehicle in the
direction of travel (fig. 16).
2. Take out the reducer cushion (4). Pass the
abdominal strap of the seat belt through the
lower seat guides
Buckle the vehicle seat belt until you hear a click
(fig. 21).
3. Pass the diagonal section of the vehicle´s belt
through the rear side of the backrest cushion and
the seat backrest.
4. And continuing, pass the diagonal section of the
vehicle´s belt between the backrest and the
headrest sides (fig. 21).
5. Make sure it is as tight fitting as possible. Ensure
46
(19)
firmly into the insertion
(11)
and underneath the seat.
the straps are not twisted or knotted at any point.
to ensure the belt holds tighten the seat, you can
press with the knee on the seat at the same time
you are fitting the belt to the seat
For the safety of the child the following checks
should be made before every trip:
• The safety seat is firmly installed in the vehicle.
• The straps are not twisted.
• The safety seat straps are firmly fastened around
the child's body, without squashing it.
• The shoulder straps
and not twisted.
The shoulder protectors (3)
child's shoulders.
The clasps (5)
are correctly inserted into the belt
buckle (7).
7. PLACING THE CHILD IN THE SEAT.
GROUP 1
To install
the child correctly follow the steps
described in section 5.
8.INSTALLING THE CHILD SEAT. GROUP 2 /3
GROUP 2 /3. From 4 to 12 years
approx. (15- 36 kg)
1. Make sure the 5-point harness and harness buckle
have been correctly removed (see points 3.4).
2. Follow the steps described in section 3.8.
(10)
are correctly adjusted
are on a level with the

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

More+ werdu plus rwfDs15

Tabla de contenido